Specialist in replacement gate remote equipment

All remotes come complete with full programming instruction

Universal Remote Control Keyfobs

Cloning Universal Garage and Gate Remote Control

The GR4000 is a 4 channel remote that can copy any 433Mhz fixed code remote with DIP switches or fixed code remotes.

A great feature of the GR4000 is the sliding cover which prevents accidental operation and undue battery wear when kept in pockets, handbags etc.

These cloning remotes can only copy 433 MHz DIP switch remote controls. To check you remote open up the case to see if it has DIP switches as shown below.

Your remote Should have between 8 and 12 switches inside that look similar to those shown above.

The GR4000 can assign up to 4 different channels to the 4 buttons. I.e. up to 4 garage door or gate receivers.

This remote is not compatible with rolling code or code hopping technologies.

Operating Distance: up to 80m

Batteries: 12 VOLT 27A (Included)

Quantity discounts:
5+ = 5% discount, 10+ = 10 % discount
Discounts are added automatically on checkout.
PRICE: £ inc VAT
Quantity: 

Simple 4: Step Programming Instructions;

1. Clear memory and prepare for programming - Hold down buttons 1 and 2 until the blue LED flashes - this takes around 20 seconds.

2. Place the original and the clone remote close together.

3. Press the button to be programmed on both remotes and hold until LED flashes steadily on the clone remote.

4. Programming is complete - Repeat steps 2-4 to program extra buttons.

The GR4000 will copy all of the following and more: